Descargar Imprimir esta página

Basko Healthcare Clubycare Instrucciones Para El Usario página 10

Ocultar thumbs Ver también para Clubycare:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
Instructions
Check the packaging immediately:
A) 1 pc Clubycare shoe
B) Instructions for use
Putting on the shoe
Step 1: Measure the length and the breadth
of the foot and refer to the size chart in
order to select the right size (see size chart).
Step 2: Open the shoe's fastening, band
and laces/velcro (Fig. 1).
Step 3: Position the foot in the shoe. Make
sure the heel is positioned properly towards
the back of the shoe. Check for correct
positioning via the heel cut-out (Fig. 2).
Step 4: Place the strap over the instep, pull
it to the back and fasten it. Check again that
the foot is properly positioned towards the
back (Fig. 3).
Step 5: Pull the top and bottom of the sock
or stocking tight so there are no folds inside
the shoe. (Fig. 4).
Step 6: Fasten the lace or velcro and repeat
steps 1 to 4 with the other foot and shoe
(Fig. 5).
Step 7:
(only in combination with the P.E.A.care splint)
To mount the shoes on the splint, slide the
shoe with the foot plate sideways onto the
splint. Press and click the foot plate into
position on the adapter. To separate them,
press the red release clamps together and
slide the foot plate off the adapter (Fig. 6).
7

Publicidad

loading