Code Identification; Reset To Factory Settings - Jasco 34932 Instruction Manual

Using Your Remote

Code Identification

Press and hold down the SETUP
1.
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
2. Press and release the desired device
button (tv, cbl, dvd, aux) you would
like the code for.
Press and release the ENTER button.
3.
Press and release the #1 button.
4.
Count the number of times the remote
light flashes. This is the number
corresponding to the first digit of the
code. Repeat the process by pressing
the #2, #3 and #4 buttons for the
remaining digits.
Press and release the ENTER button
5.
to exit this mode.

Reset to Factory Settings

Press and hold down the SETUP
1.
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
Press and release the MUTE button.
2.
Press and release the number #0
3.
button. The red indicator light will
flash twice.
12