Jasco 34932 Instruction Manual página 7

Programming Your Remote
4. Use the number buttons on the remote
to enter the first 4-digit remote code
you circled in the Code List in Step 1.
The red light will turn off after entering
the fourth digit.
5. Point the remote at the device. Test
the buttons on the remote to see if the
device responds as you would expect.
If the buttons do not operate the
device, return to Step 2 above and use
the next code that you circled for that
device.
6. Repeat Steps 1 – 5 for each device you
wish to control.
Programming Notes
• Some codes may operate only a few functions
of your device. There may be another code in the
Code List that controls more functions. Test other
codes in the Code List for more functionality.
• If you do not find a remote code that works your
device or there are no codes in the Code List for
your device, use the Auto Code Search method in
the next section to program your remote.
• For combination devices such as a TV/DVD combo
or TV/ VCR combo, you may have to enter a code
for each device.
• Write down the remote codes used to program the
remote for future reference.
7