Polaroid SprintScan 45 Ultra Guía De Instalación Rápida página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Secure the film with the two magnets provided, on the top
4
and bottom edges. Be sure the magnets are also within the
raised ridges.
5
Place the adapter in the 4x5 carrier, sliding the notches into
the pins on the left edge. The film and magnets should be
face up, as shown.
6
Close the carrier. Squeeze the carrier at the bottom edge and
turn the knob to lock it.
The Single-35mm Carrier
Open the 4x5 carrier as described previously.
1
2
Locate the single-35mm adapter.
You can use a negative, or a mounted or unmounted
Note:
slide.
Orient the adapter so the metal tabs face up, and the notches
3
are at the left edge. Slide the film into the channel, under the
two metal tabs. Position the film so the image is right-
reading and right-side up.
English 12

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido