Polaroid SprintScan 45 Ultra Guía De Instalación Rápida página 8

25 50
pins pins
Computer Other SCSI device
(unterminated)
25 50
pins pins
Computer Scanner
(termination off)
25 50
pins pins
Scanner
(termination on)
25 50
pins pins
Other SCSI device
(terminated)
You may need additional cables or adapters to connect the
scanner. Your cable must have a 50-pin Centronics M or DB-25
M connector at one end for attachment to the scanner, and the
cable should be as short as possible. To determine the connector
you need for attachment to your SCSI adapter, refer to
instructions with the adapter.
Set Termination
Terminate the scanner and all other SCSI devices as shown in the
appropriate cabling diagram to the left or on page 7. The last
device in the SCSI chain must be terminated (or termination on),
while all other devices must be unterminated (or termination off).
Set scanner termination with the termination switch (
page 7). On = terminated, Off = unterminated.
Termination instructions for your other SCSI devices are
provided with the devices.
on
d
English 8