Publicidad
Idiomas disponibles
Idiomas disponibles
(EN)
Please read the entire instruction manual before using the product and then save it
for future reference.
SAFETY INSTRUCTIONS
- The Bluetooth speaker should not be taken apart or modified. The casing
contains hazardous unshielded live components, which if touched could start a
fire or give you an electric shock.
- Do not cover the Bluetooth speaker. Adequate ventilation, with a distance of at
least 5 cm between ventilation ports and surrounding surfaces, is necessary to
prevent the Bluetooth speaker from overheating.
- The Bluetooth speaker must only be connected to a standard domestic 220-240
V, 50&70 Hz electrical supply.
- Make sure that the power socket that the adaptor is connected to is easily
accessible, since this is the only way to completely disconnect the Bluetooth
speaker from the electrical system.
- Place the Bluetooth speaker on a stable, flat surface.
- Do not place the Bluetooth speaker where I could fall into water or other liquids.
Do not place any objects which contain liquid onto the product such as vases,
drinks, etc.
- Do not place the Bluetooth speaker near naked flames such as wood stoves, lit
candles, etc.
- Position the Bluetooth speaker where there is no risk of people tripping over the
adaptor´s lead.
- This product is intended for indoor use only.
- Never subject the Bluetooth speaker to high temperature, dust, heavy vibration,
impacts, humidity or moisture.
- Do not abuse the adaptor or its lead. Never unplug the product by pulling on its
adaptor lead. Always grip the plug itself. Make sure that the lead does not come
into contact with heat, sharp edges or is crushed in any way.
- Unplug the adaptor from the wall socket during thunderstorms or if the Bluetooth
speaker is not to be used for a long time.
- The Bluetooth speaker´s standby switch does not disconnect the product
completely from the mains. To completely disconnect the speaker from the mains,
the adaptor must be unplugged from the wall socket.
- Protect your hearing. Listening on high volume for prolonged periods can lead to
permanent hearing loss.
- Do not use the Bluetooth speaker if the adaptor or its lead is damaged in any
way.
- The Bluetooth speaker should only be repaired by qualified service personnel.
GENERAL SPECIFICATIONS
- Bluetooth 4.0 with audio and digital signal processing for clean, best-in-class
wireless stereo sound
- Rechargeable Lithium-ion battery for up to 3 hours of playtime.
- Micro USB charging cable included.
- Connects to a 3.5 mm headphone port of iPod or any device with using a audio
cable.
- Auto-search and auto-reconnect with compatible device.
- Comfortable touch button to control the player.
- Bluetooth v4.0 includes profiles: A2DP & HFP
- Two Φ45 mm full range drivers deliver superb music fidelity.
- Advanced Audio Distribution Profile (A2DP) for wireless music streaming.
- Hands-free Profile (HFP) for calling.
- Range up to 33FT (10M).
COMPATIBILITY
Wireless: Devices with Bluetooth 2.0 or above (See General Specifications for
profiles).
Wired: Devices with a standard 3.5 mm headphone output port via 3.5 mm audio
cable.
WHAT´S INCLUDED:
- Bluetooth Speaker
- 3.5mm audio cable
- Charging micro-USB cable
1. BUTTONS AND FUNCTIONS
1. Carrying handle
2. Previous track
3.
Answer/play/pause
4. Next track
5. MIC
6. STATUS (LED indicator)
7. Decrease volume
8.
Volume off
9. Increase volume
10. Speaker
11. Battery compartment for rechargeable battery
12.
On/off switch
13. AUX – 3.5mm socket for external playback sources
14. 5 V DC – Charger cable connection
15. Charge indicator
LED INDICATIONS
On the top:
Off = speaker switched off
Blue light = speaker switched on Flashing blue light = pairing mode
Green light = AUX IN
On the back: RED –Battery is recharging
Green –Battery is full charged
OPERATING INSTRUCTIONS
1. Make sure that the mobile phone is turned on and the speaker is off.
2. Set the (ON/OFF) switch ON. A 3-second beep will be emitted. The blue LED
indicator will flash every 0.5 seconds to indicate that pairing mode has been
entered. Note: if the speaker fails to pair with the Bluetooth device within 3
minutes, the blue LED indicator will flash every 3rd second and will stop flashing
completely if pairing has not occurred within 30 minutes.
3. Activate Bluetooth on the device to be paired and place it into search mode.
4. The Bluetooth speaker will appear as "620BT" on your device. Select this as the
device to be connected. Refer to the instruction manual of your device if you are
unsure. Note: if prompted for a code, enter 0000.
5. Once a connection has been made, a beep will be heard and the blue LED
indicator will flash every other second.
6. Start playback on the paired device. Playback control:
Volume: Using the volume controls on the top of the Speaker, press the V+ button
to increase volume and the V- button to decrease volume.
Pause music: Press
button to pause playback. Press again to resume
music.
Mute: Press MUTE button to mute speaker.
Next/Previous song: Press
play previous song.
7. The speaker has a handsfree feature. Press
AUTOMATIC RECONNECTION
If the speaker and Bluetooth device are disconnected due to temporary
interference or excessive range, they will automatically be reconnected within 10
seconds once the cause has been rectified.
If you wish to connect another Bluetooth device after you have already paired the
speaker, press
for about 3-4 seconds. The blue LED indicator will flash every
0.5 seconds to indicate that pairing mode has been entered.
CONNECTION OF OTHER DEVICES (AUX IN)
- Connect the external device to the Bluetooth speaker´s 3.5 mm AUX IN socket
(3.5 mm cable sold separately).
- Note: Any streaming from a Bluetooth device will be muted when a 3.5 mm cable
is connected to the AUX IN socket. When the cable is removed the speaker will
resume audio streaming from the original Bluetooth device.
- Start playback on the external audio device.
RECHARGING THE BATTERY:
1. Charge the speaker battery by plugging one end of the micro USB cable into the
speaker and the other end into a USB power source such as a computer.
2. The charge indicator will begin by shining red and then change to green once
the battery is fully-charged. It takes about 4 hours to charge the speaker from a
flat battery. Note: the first three times the battery is charged it is wise to let it
charge for 12 hours.
CARE AND MAINTENANCE:
- Unplug the adaptor lead and remove any batteries if the Bluetooth speaker is not
to be used for a long time.
- Clean the product using a lightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
TROUBLESHOOTING
The Bluetooth speaker will - Make sure that the ON/OFF switch is set to ON.
not switch on
- Make sure that the cable is undamaged and
CORRECTLY connected to the Bluetooth speaker.
- Ensure that there is power at the wall socket.
No sound
- Check the volume.
- Make sure that there is no cable connected to the
AUX IN socket when using Bluetooth.
- Make sure that the Bluetooth connection is
functioning properly.
- Test the playback from your external device before
connecting it.
- Try playback using another file or format e.g. MP3.
The file you are attempting to play may be
incompatible or damaged.
DISPOSAL
This product should be disposed of in accordance with local regulations. If you are
unsure how to proceed, contact your local council.
TECHNICAL SPECIFICATIONS:
Output power:
2 x 2.5 W (RMS at 10% THD)
Frequency response:
120 Hz-16kHz
Sensitivity:
750mv
Input:
3.5mm AUX
Charging socket:
micro USB
Lithium battery:
1000 mAh
Size:
195 x102 x 127 mm
3
button to play next song and press
to answer or end a call.
button to
Publicidad
