Getting Started; Settings - auna 10031202 Manual Del Usario

Start the Device
When unit is powered up first time, Automatic update function will start automatically and „PLEASE
WAIT FOR SETTING THANKS„ is flashing on LCD, When press any key to terminate this function.
Note: When unit is powered up first time, Automatic update function will start automatically in 3-5 mi-
nutes. If the signal is received, time display on LCD accordingly When the automatic system setting had
been terminate by user, the date and clock are defaulted to 01.01.2012, 0:00.
The alarms are defaulted to 0:00. The unit is switched off. The unit is standby mode. Default back light
automatically set to dim from 23:00 to 05:59.
When Radio Off (Auto-Run Mode), Press <MODE> once go to different mode sequentially: (1) Set the
Clock > (2) Set the Date > (3) Set the SDA > (4) Set update switch > (5) Set dimmer work Mode >
(6) Set auto dimmer timer switch > (7) Set start time of auto dimmer > (8) Set end time of auto dimmer >
(9) Set Displty mode (12/24 hour).
Set the Clock
• Press <Mode> once when the unit stays in clock display mode.
• The clock goes flashing.
• Press <UP> to advance the clock by 1 minute.
• Press <Down> to move the clock back by 1 minute.
• Press and hold <UP> or <Down> to set the clock in fast mode of 10 minutes per step.
• Press <Mode> once to go to set the date.
• Press other key to start its corresponding function.
• When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run mode.
Set the Date
• Press <Mode> once in clock setting mode
• The current date goes flashing in the format of DD.MM.YY.
• Press <UP> or <Down> to change the current setting by 1 day per step.
• Press and hold <UP> or <Down> to change the setting in fast mode of 10 days per step. The day flag
will be updated automatically when the date has become steady.
• Press <Mode> once to confirm the current setting and it switches to set the SDA.
• Press other key to start its corresponding function.
• When no key has been pressed for 10 seconds, the current setting is confirmed and it switches to
auto-run automatically.

Getting Started

Settings

19
www.auna.de