Publicidad
Idiomas disponibles
Idiomas disponibles
attention Plumbers: tYPical mounting instructions For Kl/Kn41 & 45 series
REPLACEMENT CARTRIDGE
REPLACEMENT CARTRIDGE
HOT VALVE ASSEMBLY
COLD VALVE ASSEMBLY
MODEL #KN50-Y007
MODEL #KN50-Y006
GENERAL INSTRUCTIONS:
Thank you for purchasing one of our quality plumbing
products. Most faucets are supplied with mounting
hardware, including ½" nipples. For installation instructions,
we will assume that hot and cold water supplies end in ½"
nipples. We recommend using a 1-1/4" hole in the deck or
backsplash to accommodate the ½" supply nipples.
1. Turn off water supply at main source.
2. Hand-tighten all parts prior to tightening with wrench.
3. Do not force parts together.
4. All plated surfaces should be handled with care. Avoid
scratching with tools.
5. Dimensions shown are for reference only and not to
be used for pre-plumbing.
6. Use teflon tape or pipe joint compound when making
threaded connections to water supply lines.
INSTALLATION INSTRUCTIONS:
1. Rigid Spout: Thread into opening on faucet body and
tighten spout into body. Swivel Spout: Push swivel
spout into threaded opening on faucet body and
tighten spout nut to body.
2. Using plumber's putty, run a thick bead of putty on
the under side of faucet body around perimeter
and shanks.
3. Deck Mount: Insert into mounting holes in deck.
Back Splash: Insert faucet body into backsplash.
4. Using mounting kit provided, tighten faucet shanks
to deck or backsplash (as shown) and scrape excess
putty away from body. Install mounting hardware in the
following order: rubber washer, metal lock washer &
lock nut.
5. Connect water supply line to faucet shanks.
6. Turn on water supply and check for leaks.
MOUNTING KIT:
WASHER
1/2" NPSM COUPLING NUT & SEAL
LOCKING WASHER
FOR 1/2" RIGID OR FLEXIBLE RISER
LOCKING NUT
SPOUT NUT
FAUCET BODY
Component Hardware
1890 Swarthmore Avenue, PO Box 2020, Lakewood, New Jersey 08701
www.encoreplumbing.com
SPOUT NUT
FAUCET BODY
MOUNTING KIT:
WASHER
LOCKING WASHER
LOCKING NUT
1/2" NPSM
®
Publicidad
