GE WPGT9350 Manual Del Propietario E Instrucciones De Instalación página 22

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ATTACH WATER HOSES TO WASHER
2
Thread the hot water hose onto the washer
hot water connection (ORANGE) and the cold
water hose onto the cold water connection
(BLUE). Hand tighten; then make an
additional 1/8 turn with pliers.
Hot
MOVE WASHER CLOSE TO
3
HOUSE UTILITIES
Move the washer as close to the final location
as possible, leaving enough room to make
water, drain and electrical connections to the
home.
The minimum required rear clearance is 3".
Installation Instructions
Cold
3"
CONNECT WATER HOSES TO
4
HOUSE UTILITIES
Connect the water hoses to the HOT and
COLD water valves of your home. Hand
tighten, plus make an additional 1/4 turn
with pliers.
ATTACH DRAIN HOSE TO
5
HOUSE DRAIN
Firmly insert the free end of the drain hose
into the drain opening of your home. Make
sure the soft rubber end is completely inside
the drain opening.
• If the water valves and drain are built into
the wall, fasten the drain hose to one of the
water hoses with the cable tie (ribbed side
on inside).
• If your drain is a standpipe, fasten the drain
hose to the standpipe with the cable tie
provided.
Cable Tie
22
Cable Tie

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Wpgt9360

Tabla de contenido