Installing The Fan; Hanging The Fan - LUCCI WHITEHAVEN Manual De Instrucciones De Instalación

Whitehaven Fan Installation Instructions
Blade installation

Remove the ball joint (1) by loosening the set screw (2). Fig.4

Remove the canopy (3) and the motor housing (5) from the down rod (4).

Secure the blade (7) to the blade holder (8) by tightening the 3 blade screws (6).

Repeat to install the other blades to the blade holders.

Reinstall the motor housing and the canopy to the down rod. Fig. 5

Secure back the pin and the ball joint to the down rod. Fig.5

Install the globe to the lamp holder. (For fan with light only) Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is positioned
on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.4)
6 | P a g e

INSTALLING THE FAN

Fig. 5

HANGING THE FAN

Fig. 7
Fig. 4
Fig. 6