Choose A Location - Forza XG 1201LCD Manual De Instrucciones

2. Product description
Front section
1
4
5
6
1. LCD display
2. Up/down button
3. Mute button
4. Power button
5. USB charging ports
6. Easy battery replacement cover
7. USB communication port
3. Installation and operation

3.1 Choose a location

Install the UPS unit in any protected environment that provides adequate airflow
around the unit, and free from excessive dust, corrosive fumes and conductive
contaminants. Do not operate your UPS in an environment where the ambient
temperature or humidity is high.
Back panel
10
2
3
14
8. RJ45 modem/phone/network surge protection
9. Battery backup and surge protected outlets
10. Surge protected outlets
11. Coaxial line jacks
12. Ventilation grill and fan
13. Input circuit breaker
14. AC power cord
3.2 Charge the UPS
• This unit is shipped from the factory with its internal battery fully charged; however,
some charge may be lost during shipping. Therefore, it is recommended to recharge
7
the battery prior to initial use.
8
• Simply plug the unit into an appropriate AC outlet, and allow it to fully charge
9
during the first 5 hours of normal operation.
11
PLUG IN
12
13
Note: Do not expect full battery run capacity during this initial charge period.
3. 3 Connection of the loads
• Connect one device into each power receptacle provided on the back of the UPS.
• Plug sensitive equipment into the battery backup outlets.
• Battery power is automatically provided to the loads in case of a power outage.
• Connect mobile devices into the USB charger ports. This will automatically start
charging the connected devices.
Note: Make sure that the UPS is powered on to protect all important devices from data
loss during power failure.
forzaups.com