MO-EL MO-STICK INOX 372 Uso Y Mantenimiento página 12

Ocultar thumbs Ver también para MO-STICK INOX 372:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
Before inserting the plug make sure that the voltage is the same as
indicated on the device.
The energy supply must be done through a properly grounded sock-
et.
Avoid exposing eyes or skin to the UV-A rays of the appliance for
distances less than 1.6 meters.
Do not plug in the appliance in presence of inflammable materials,
gas or liquids.
Do not operate the appliance with wet hands or feet.
Do not use if cord or plug is damaged.
Keep cord away from heat.
Do not use adapters or multiple plug electric suppliers.
Unplug unit when not in use.
Do not unplug by pulling the wire, unplug acting directly from the
plug.
Always unplug the appliance before doing any maintenance opera-
tion.
Do not spread any inflammable liquid, gas or material on the appli-
ance.
If the power supply cord is damaged avoid to use it. Let the Manu-
facturer, or the After Sale Service, or some similar qualified person
replace it, in order to avoid any risk.
In case of malfunction, verify the correct operation of the electric
installation: whether it was right but the appliance still shows prob-
lems a qualified technical service will be able to do any repairing.
For a best appliance's performance use only spare parts supply by
the Manufacturer.
HOW THIS APPLIANCE WORKS
The special UV-A lamps are set to attract all flying insects to the appli-
ance. When insects approach they remain stuck on the glued paper
(supplied as a spare part). This appliance allows capturing the flying
insect within the environment nearby.
12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mo-stick professional 397

Tabla de contenido