Accessory Description - Klarstein 10030152 Manual De Usuario

EN
28

ACCESSORY DESCRIPTION

The measuring cup
• To measure the amount of different ingredients. Is
marked with scaling measures. Its maximum capacity
is 80ml.
• To avoid splashing.
• To prevent heat loss during cooking.
• You can add liquid in the jar with the measuing cup is
placed on the top.
Jar cover
The cover serves to close the jar and activate safety sensor.
Has a gap in the front and a button on the back that fits and
engages the groove of the top of the handle. It also has a
hole in its side central used to add food enter the spatula to
remove and coupling the measuring cup. Incorporating a
silicone seal that prevents that overflow liquid from the jar
and cap. When installing make sure the gasket that the bulk
side of the seal is on contact with the lid.
Important: Never use without the cover properly
assembled joint. Never open the cover when it is hot.
Because there steam out or burns. Before opening
the cover, top the cooking processor and wait a few
seconds to make sure the blades completely idle.
Blades holder
To attach the blades to the
jar: Insert the blades into
the jar, place the holder
from the bottom of the jar,
turn clockwise from Open
to Close.