User Interface - EemaX HA008240 Instrucciones De Instalación

10- USER INTERFACE

Power

Click adjustment knob, the display will turn on

Click the adjustment knob again, the display will turn off
C/F Conversion

Press the adjustment knob for 3 seconds, the display will change from Fahrenheit to Celsius or vice
versa
Temperature Control

Turning the knob clockwise increases the set output water temperature

Turning the knob counter clockwise decreases the set output water temperature

You can set or adjust the temperature at any time between 80°F – 140°F (27°C – 60°C). The temperature
can be changed to your desired setting. The display will only stay on when the unit is in use or when you
are setting the temperature.
CAUTION: Removing the cover to change the temperature set point exposes electrical shock and burn hazards,
which can cause INJURY or DEATH. Adjustment should only be done by a licensed plumber or electrician.
DANGER: Hotter water increases the potential for Hot Water SCALDS.
HA008240 – HA011240 – HA013240
1. Hot Water Outlet
2. Cold Water Inlet
3. Celsius/Fahrenheit Conversion (Press & Hold 3 sec.)
4. Temperature Set Point Display
Model Number
HA008240
HA011240
HA013240
HA018240
HA024240
HA027240
HA036240
HA018240 – HA024240 – HA027240 – HA036240
5. Adjustment Knob & Temperature Control
6. Wire Connection
7. Brass Compression Nut
8. Brass Compression Ferrule
Height Width
��
11 inches 8 inches
⁄
��
11 �� inches 8 inches
⁄
��
��
11 inches 8 inches
⁄
��
17 inches 14 inches
17 inches
17 inches
17 inches 17 inches
17 inches 21 inches
10
9. Electrical Strain Relief
10. Mounting Bracket (1")
Pipe Centers Distance
Depth
��
3 inches
⁄
��
��
3 inches
⁄
��
��
3 inches
⁄
��
�� ��
3 inches 5
⁄ ⁄
��
3 �� inches 5 ��
⁄ ⁄
��
�� ��
3 inches 5
⁄ ⁄
��
�� ����
3 inches 9
⁄ ⁄
��
-
-
-
inches
��
inches
��
inches
��
inches
����