The Fountainhead Group 190197 Manual Del Usuario página 6

Spraying
1. Direct the nozzle away from you. Squeeze
the shut-off handle to begin spraying.
2. Release the shut-off handle to stop
spraying.
3. For continuous spraying, squeeze the shut-
off handle and rotate the lock (A, Figure 8)
towards you. To unlock, rotate the lock
towards the nozzle.
A
Figure 8. Apply and Release Shut-off Lock
A. Shut-off Lock
4. Turn the nozzle tip to adjust the spray
pattern.
Finish
1. Pull up on the knob of the pressure release
valve until all the pressure is released from
the tank. See Figure 9.
Figure 9. Release Tank Pressure
2. Turn the pump handle counterclockwise to
remove the pump.
3. Empty any remaining liquid according to
the product disposal directions.
4. Follow the Cleaning instructions.
Cleaning
1. Remove the pump as described in the
Finish section.
2. Fill the tank with clean tap water. Replace
the pump and tighten securely.
3. Agitate the tank to rinse the chemical from
the tank wall and pump.
4. Remove the pump and empty the contents
into gravel or bare soil.
5. Refill the tank with clean tap water.
6. Make sure the pump is free of dirt or debris
and reinstall into the tank. Tighten securely.
7. Pressurize the tank as described in the
Pressurizing section.
8. Direct the nozzle away from you and
squeeze the shut-off handle for at least 30
seconds to clean the hose and shut-off.
9. Release pressure as described in the Finish
section.
10. Remove the pump and empty the contents
into gravel or bare soil.
11. Repeat steps 5 - 10 until thoroughly
cleaned.
Sprayer Storage
1. Sprayer tank should be hung upside down,
with the pump removed.
2. Do not store or leave any solution in the
tank after use.
3. Store in a warm, dry location out of direct
sunlight.
4. Keep the sprayer and all chemicals out of
the reach of children.
4