Ducasa ALU STONE 1000 Manual De Instalación Y Funcionamiento página 29

1. Mode selection (OK button)
For the first time you use the device, after you connect to
the power supply and after that the clock is set, the device
will be in standby mode, and you can press the standby
button to go to comfort mode.
Notes: In case of power failure, the unit keep in
memory only the parameters, temperature and oper-
ating mode. When power is restored, the clock
should be adjusted again to operate the program
modes properly.
Press OK to toggle among the modes: comfort
Program mode
/ Anti-freeze
Program modes and Fil pilote share the same icon
And these 2 modes are mutually exclusive. When the
appliance is working on Program mode, press and hold
OK button for 3 seconds, the appliance will shift from
Program mode to Fil pilote mode.
When the appliance is working on Fil pilote mode, press
and hold OK button for 3 seconds, the appliance will shift
from Fil pilote mode to Program mode.
The interface of program mode and Fil pilote mode are as
below:
Program mode
or Fil Pilote
.
/ Window detection mode
Fil pilote
/ Eco /
.
29