Ducasa ALU STONE 1000 Manual De Instalación Y Funcionamiento página 30

Nota: For the program mode, mode setting and mode
selection is separated. If you want to set the program
mode, press + & - together to enter setting menu to
choose program mode setting and press OK to enter
setting interface. For details, please refer to part
2"Program mode setting"under section III"Setting menu".
Notes: In case of power failure, the unit keep in memory
only the parameters, temperature and operating mode.
When power is restored, the clock should be adjusted
again to operate the program modes properly.
2. Fil-pilote mode
Press OK button to choose mode (Program modes or
Fil pilote mode). Under Fil-pilote mode, select the mode
via the external control (for France only).
If the working interface is at Program mode, press and
hold OK button for 3 seconds, the appliance will shift from
Program mode to Fil pilote mode.
For other countries except France, if you choose mode Fil
pilote P, the appliance will work at comfort mode as default.
3. Window detection mode
Press OK button to enter window detector function. The
appliance will enter comfort mode as default. If
temperature decrease detected, the appliance will
automatically enter anti-freeze mode. If temperature rises
up, the appliance will go back to comfort mode. You can
press OK button to choose other modes, or press standby
button to enter standby mode.
REMARKS: under window function, pilot control is not
available.
30