Sensor Activation - FAAC TM2 X W Manual Del Usuario

SENSOR ACTIVATION

Before assembling the shell on the base:
- Rotate the selector to a middle value from 1 to 9 (e.g. 5).
- Activate the sensor by pressing the SET button for at least 4 seconds until the LED
flashes twice quickly.
SELECTOR
PROCEDURE
- Snap the shell onto the base.
- Stand by for 10 seconds until the sensor detects the rest position and the motor
makes its confirmation movements*.
Within three minutes proceed with the sensor test operation.
TM2 X W
5
set
4 sec
10 sec.
........
22
*
A4518_6H02_Rev.A