Samsung RS263TD Manual Del Usuario página 14

setting up your side-by-side refrigerator
setting uP the refrigerator(Cont'D)
If your entrance won't allow the refrigerator to pass easily through it, you can remove the doors.
Tools you will need
Philips Screwdriver
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the
three screws counter-clockwise.
Separating the water supply line from the refrigerator
1. Remove the water tube by pressing the coupler
Do not cut the water line. Gently separate it from the coupler.
Reattaching the water supply line
1. While pressing the front face of coupler
, insert the water line
2
Carefully place front cover and push to
snap it into position.
2. Insert 1 clip in plastic bac and check that it
holds the line firmly
The water line must be fully inserted to
the marked line to prevent water leakage from the dispenser.
14_ setting up
Flat-blade Screwdriver
2
1
Line
in the coupler.
1
10mm Socket Wrench
front Leg CoVer
sCrew
and pulling the water tube
2
Coupler
1 2
Clip a (1/4")
Coupler
away.
1
Line
Coupler