using the iCe anD CoLD water DisPenser
Using the water dispenser
Press the water button on the control panel. Place your cup on the water
outlet and push against the dispenser pad until hearing the "click" sounds.
Make sure the glass is in line with the dispenser to prevent the water from
splashing out.
to get colder water
- The dispensed water is cool, not icy cold
- When you want colder water with ice, dispense ice to your glass first
before filling it with water to prevent water from splashing out.
Using the ice dispenser
Press the ice type button to select the type of ice you want. Place your cup under the ice outlet and
push gently against the dispenser pad. Make sure the glass is in line with the dispenser to prevent
the ice from bouncing out. When cubed ice is selected after using the crushed ice, a small amount of
residual crushed ice might be produced.
No Ice
Select this
if you want
to turn the
ice maker off.
Water
Push
operating _25