Schlage Control FE410F Instrucciones De Instalación página 5

2b Adjust the spindle on the inside assembly, if necessary.
If the spindle is not in the correct position, locking and unlocking
could be reversed, resulting in an unsecured residence.
See Determine the Handing on page 2 to determine the
L
hand of your door.
2c Make sure the cam on the inside assembly is in the correct
position.
If the cam is not in the correct position during installation, locking
and unlocking could be reversed, resulting in an unsecured
4
CAUTION
Left hand position
(tabs vertical)
Right hand position
(tabs horizontal)
CAUTION
residence.
2d Install the inside assembly on the inside of the door.
Bolt must remain retracted!
L
2e Secure the inside assembly with the two top screws.
If the screw holes are blocked by the cam, see step 2c.
L
Route the cable
through the hole in the
inside assembly.
Guide the slot onto the
tailpiece.
Actual Size (2)