Reprocessing; Before Loading The Machine And Before Starting A Programme - Miele professional E 337/1 Instrucciones De Manejo

en - Areas of application
50
Place these inside the receptacles of the A 830. Make sure that the

mirror surfaces do not touch, otherwise they may sustain damage
during reprocessing.
Handles should be placed inside the compartments of the E 337/1

with the screw threads pointing down.

Reprocessing

Once the insert has been loaded, place it into an upper or lower

basket where space allows.
Do not stack load carriers such as mesh trays or inserts one above
the other.
Before loading the machine and before starting a
programme
– Are instruments that are sharp at one or both ends positioned se-
curely enough inside the plastic receptacles?
– Have the instruments been arranged so that the functional ends are
not resting on the wire frame?