Turning On The Instrument And Preparing For Use - Inficon D-TEK Stratus Instrucciones De Operación

7 | Turning On the Instrument and Preparing for Use

7 Turning On the Instrument and
Preparing for Use
If the screen does not turn on, the battery is low and needs to be charged. D-TEK
Stratus can be used while charging.
D-TEK Stratus always starts in the last mode that was used.
Do not block the exhaust port.
Blocking exhaust air can cause false alarms or readings.
14 / 405
1. Long press the power button (located on the left side of the body of the
instrument) to turn D-TEK Stratus On or Off.
ð D-TEK Stratus begins a variable-time warm-up for 45 to 90 seconds. When
warm-up is complete, D-TEK Stratus is ready to use.
2.
To switch modes, press the MODE button. This toggles between Cloud Hunting,
Pinpoint and Manual Zero modes.
WARNING
074-708-P16B D-TEK Stratus Operating Manual
INFICON