Removing And Installing The Lithium Ion Battery - Inficon D-TEK Stratus Instrucciones De Operación

13 | Removing and Installing the Lithium Ion Battery

13 Removing and Installing the Lithium Ion
Battery
22 / 405
1. Press the eject button on the back of D-TEK Stratus and remove the battery
door.
2.
Remove the battery by moving the battery release tab to the side until the
battery begins to eject. Slide the battery out.
3. Re-insert the battery by first aligning the battery with the rails.
4. Gently push the battery along the rails until the battery release tab engages.
ð Do not force the battery. If the battery does not slide freely, check the
alignment and try again.
5.
Reinstall the battery door.
eject button
battery release tab
074-708-P16B D-TEK Stratus Operating Manual
INFICON