Machine Description; General Machine Description - Husqvarna HTC 5 Serie Manual De Usuario

HTC T5

4 Machine description

4.1 General machine description

A grinding machine from HTC has been developed for processing various types of floor. It is
used to grind, coarse grind, prepare and polish concrete, natural stone and terrazzo floors or
other materials specified in this manual as recommended by HTC.
The machine is constructed from a number of main components, see below.
The handle can be set in several different positions.
The machine's grinding head is covered by a sloping hood, which provides a close fit to the
floor. The cover together with the connected vacuum system provide the conditions needed
for a good work environment. The cover ensures that the operator does not come into
contact with rotating mechanical parts and exposure to dust is minimised. Because the cover
is floating, the dust uptake is optimised since it is always in contact with the surface.
Always make sure that a dust extractor is connected to the grinder during dry grinding to
prevent as far as possible exposure to dust particles of operators, people in the vicinity, the
grinder and other equipment.
The machine can be easily equipped with a large number of tools, depending on the floor
material to be ground. For more information about different tools, see HTC's website
www.htc-floorsystems.com.
Some grinding machines can be equipped with a Mist Cooler system for effective cooling of
the grinding tools. This system enables a very fine water mist to be diffused through a nozzle
over the floor surface, which cools the tools and thereby makes the grinding more effective.
D004753, 01.01
WARNING
Dust.
Risk for personal injury.
The dust that is sucked up may be harmful if inhaled. Follow
local regulations and use breathing protection.
Machine description
17