EAS ELECTRIC EMF1825SW Manual De Instrucciones página 20

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Proper use of refrigerators
Illuminating lamp and replacement
Lamp replacement by professionals
Placement
Start
V.1
Before using the
refrigerator, remove all
packaging materials
including bottom
cushions and foam pads
and tapes inside the
refrigerator, tear off the
protective film on the door
and the refrigerator body.
Keep away from heat and
avoid direct sunlight. Do not
place the freezer in moist or
watery places to prevent rust
or reduction of insulating
effect.
The refrigerator shall stay
for half an hour before
connecting power when
it is firstly started.
The refrigerator shall run
2 to 3 hours before loading
fresh or frozen foods; the
refrigerator shall run for
more than 4 hours in
summer in advance
considering that the
ambient temperature is
high.
750mm
1270mm
5
The refrigerator is placed in a
well-ventilated indoor place;
the ground shall be flat, and
sturdy (rotate left or right to
adjust the wheel for leveling if
unstable).
The top space of the refrigerator
shall be greater than 30cm, and
The refrigerator should be placed
against a wall with a free distance
more than 5cm and not exceeding
7.5mm to facilitate the opening and
closing and heat dissipation.
Wipe the refrigerator inside and
outside with warm moist rag (add
a small amount of Neutral detergent
in the warm water and wipe clean
finally with clean water).
Please leave enough space to
ensure feasible opening and
drawer removal.
Dimensions shown are for
reference only.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Emf1825sx

Tabla de contenido