Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 171
Operation

Hot water

90°
Push the outer ring inward
and turn it back 90°.
Start-stop and auto-stop:
If desired: set the amount of
hot water in millilitres.
38
Pull the outer ring
outward again.
<1
Touch the side sensor for
less than 1 sec. to dispense
the selected amount of
hot water.
The automatic flow of water can be stopped at any time by
touching the side sensor.
CAUTION: Both water outlets should always be positioned
above the bowl in order to prevent water damage.
8
Hot water mode
is active for 8 seconds.
>1
Start-stop: Touch the side sensor
for more than 1 sec. to dispense
hot water. Stopping contact stops
the water.

Publicidad

loading