Before to use this instrument the User guide and Safety warnings must be read
•
and understood.
Safety procedures and rules for working near high voltage energized systems
•
must be observed during the use of this equipment. The generated voltages may
be dangerous.
Do not connect or disconnect the test leads during the measurement.
•
Do not touch the test leads before the high voltage indicator turn-off.
•
Be careful not to make short-circuit between the high voltage terminals and the
•
"R" or "Guard" terminals while a measurement is running, because it could be
dangerous for the operator.
Be sure that there are not any voltage difference between the points to which the
•
equipment will be connected to, neither between them and ground.
The panel, terminals and connectors of the equipment must stay dry and clean.
•
Use only accessories / replacement parts provided by the manufacturer.
•
This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.
Safety warnings
4