Measuring Weight - Beurer Designline GS 36 Manual De Instrucciones Para El Uso

with a battery which is too weak, "Lo" appears in the display field and the scale automatically
switches off. The battery must be replaced in this case (1 x 3 V lithium battery
CR2032). The used, completely drained standard and rechargeable batteries
must be disposed of in specially marked collection containers, at toxic waste
collection points or electrical product retailers. You are legally obligated to
dispose of the batteries.
Note: Batteries containing pollutants are marked with the following symbols: Pb
= Battery contains lead, Cd = Battery contains cadmium, Hg = Battery contains
mercury.
Place the scale on a firm, flat surface; a firm floor covering is a basic requirement for correct
weight measurement.
3.2 Measuring weight
Place the scale on a firm level floor (no carpet); a firm floor covering
is required for correct measurement.
Audibly, briefly and firmly tap the scale with your foot to active the
vibration sensor! The entire display (Fig. 1) appears up to "0.0"
(Fig. 2) as a self-test (tap-on technology).
Now the scale is ready to measure your weight. Stand on the scale
without moving about and distribute your weight evenly on both legs. The
scale immediately begins to measure your weight. The scale switches off
10 seconds after you step down from it. The measuring result remains
visible during this time.
Make sure that you always switch on the scale first and wait for the dis-
play "0.0" (Fig. 2) before stepping on.
Chère cliente, cher client,
Nous sommes heureux que vous ayez choisi un produit de notre assortiment. Notre nom est
synonyme de produits de qualité haut de gamme ayant subi des vérifications approfondies,
ils trouvent leur application dans le domaine de la chaleur, du contrôle du poids, de la pres-
sion artérielle, de la mesure de température du corps et du pouls, des thérapies douces, des
massages et de l'air.
Lisez attentivement ce mode d'emploi, conservez-le pour un usage ultérieur, mettez-le à la
disposition des autres utilisateurs et suivez les consignes.
Avec nos sentiments dévoués
Beurer et son équipe
1. A savoir
Pour bien se peser
Pesez-vous, si possible, à la même heure (de préférence le matin), après être allé aux toilettes,
à jeun et nu(e) afin d'obtenir des résultats comparables.
FRAnçAIS

8888
Fig. 1
0.0
kg
Fig. 2
Fig. 3