entrematic Ditec Sector Manual De Instalación, Manutención, Uso página 36

SIGNALS ANd SETTING
47E
Trimmer
T1
0 s 30 s
T2
0 s 10 s
T3
0 MAX
T4
0 MAX
T5
0 MAX
T6
0 MAX
dip - switch
Enable adjustment through
dIP 1
trimmer
dIP 2 Preflashing opening
dIP 3 Future Use
dIP 4 Future Use
j2 Brake power supply
LEd Input
dL1 (2) Automatic closing
dL2 (3) Opening
dL3 (4) Closing
dL4
(9) Stop
dL5
(20) Partial opening
dL6 (40) Safety edge
dL7 Stop push button
dL8 (8) Closing Safety
dL9 (13) Opening limit switch
Button
ON
Starts the opening operation.
Starts the partial opening operation.
Starts and stops the STOP operation.
Starts the closing operation.
0DT827 2014-06-13
Setting automatic closing time. From 0 to 30 s.
Partial opening adjustment. From 0 to 10 s.
Adjust opening speed.
Adjust closing speed.
Adjust deceleration in opening.
Adjust deceleration in closing. It define the exact closing point.
description
ON
The green LED on indicates the presence of the 24 V=power supply.
the red LED on indicates that the STOP has been activated.
the flashing red LED indicates that the safety devices have been activated.
description
OFF
Disabled.
Disabled.
Do not use.
Do not use.
Do not cut.
LEd Input
dL10 (12)
dL11 (11)
dL12
dL13
dL14
dL15
dL16
dL17
- 36 -
ON
Enabled.
Enabled.
Do not use.
Do not use.
24 V Brake
ON
Slowing down limit switch
Closing limit switch
Flashing lamp
Run OK
Fault
Autotest
Brake
Cycles counter
LEd