Dehumidifying (Dry); Adjusting The Fan Speed - comatec RC08A Manual

OPERATIION

DEHUMIDIFYING (DRY)

1. Set the MODE selector switch to "DRY"
2. Press the ON/OFF (
3. Press the + or - buttons to set the desired temperature (Adjustable temperature
range is 16℃ and 30℃(61-86F)).
THE DISPLAY SHOWS THE
SELECTED TEMPERATURE.
NOTE
Use DRY operation when you want to reduce the humidity in the room.
Once the room temperature reaches the set level, the unit repeats the cycle of turning on
and off automatically
During DRY operation, the fan speed is automatically set to low or stops to prevent overcooling .
Dry operation is not possible if the indoor temperature is 15 °C or less.
FAN ONLY
If you want to make air circulate without any temperature control, follow these steps:
1. Set the MODE selector switch to "FAN"
2. Press the ON/OFF (

ADJUSTING THE FAN SPEED

AUTOMATIC
Simply set the FAN SPEED selector to the
automatically controls the fan speed when the AUTO mode is selected. When the air
conditioner starts operating, the difference between the room temperature and the set
temperature is detected by the microcomputer which then automatically switches the
fan speed to the most suitable level.
) button and switch the air condioner ON.
) button and switch the air conditioner ON.
8
.
.
position . A microcomputer