Lock Function - comatec RC08A Manual

OPERATIION
In cooling mode or dehumidifying mode, 1 hour after the sleep curve is set, the setting
temperature will rise by 1 degree C , 2 hours later, the setting temperature will rise by 2
degree C. After 3 hours, the setting temperature will not change any more.
In heating mode, 1 hour after the sleep curve is set, the setting temperature will
decrease by 1 degree C 2 hours later, the setting temperature will decrease by 2
degree C. After 3 hours, the setting temperature will not change any more.
I FEEL/ROOM TE MP FUNCTION OPERATION
Press button I FEEL to activate the I FEEL function. Thermometer sign will appear on
the LCD operation display
the remote control unit is aimed at the air conditioner. Prevent the I FEEL sensor from
being affected by heat sources such as lamps, heaters, direct sun, etc. or from being
directly affected by the air conditioner air flow.These may cause the sensor to transmit
the wrong temperature data, thereby disturbing the performance of the I FEEL function.

LOCK FUNCTION

By pressing - and + bottoms simultaneously to lock the last operation program. All the
function buttons will be inoperative, including POWER button. By pressing both buttons
again the remote control will be released from its locked position.
.Select suitable temperature setting. Make sure that
10