How To Use The Ups - Steren NB-2200 Manual De Instrucciones

5. How to use the UPS

2
ENTRADA 120 VAC / 60 Hz
LÍNEA FAX/MODEM/TEL
3
If an overload or short circuit occurs during battery mode, the word Fault
displays on screen and you can hear an audible alarm for 30 seconds.
8
1.- Plug the desired equipments into
the UPS' outlets. Do not overload the
equipment capacity. Please refers to
USIBLE RESETEABLE
PRESI NELO PARA
REINI IAR EL E UIPO technical specifications.
ENTRADA A
PROTE TOR
PUERTO A ODE TEL
USB
ENER ÍA
EL TRI A
LÍNEA A ODE TE L
NO ABRIR
2.- Connect the UPS into an AC household
RESPALDO DE BATERÍAS Y SUPRESOR DE
SUPRESOR DE TRANSIENTES TRANSIENTES
outlet.
3.- Press and hold the On / Off switch until
the screen turns on and you hear a beep.
4.- Power on all the plugged devices.
5.- The word Normal displays on screen.
6.- While using the UPS an electrical
current fail occurred, the message Fault
displays and you can hear an audible
alarm.
7.- The Battery message display on
screen when the UPS's battery is near to
discharge completely.