How To Install Your Remote Control - Fanimation The Avaston FP6210 Serie Manual Del Propietário

How to Install Your Remote Control (Option #1)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32 x 3/4" screws
and push in the four plastic plugs to cover the screw holes.
(Included with the control). (Figure 2)
How to Install Your Remote Control (Option #2)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32 x 1" screws
and push in the four plastic plugs to cover the screw holes.
(Included with the control). (Figure 2)
How to Install Your Remote Control (Option #3)
1. Drill two 1/4" holes in the wall and push the M6 plastic
anchors into the holes. Install the control bracket using
the two #3 - 1" self tap screws. Push in the four plastic
plugs to cover the screw holes. (Included with the control).
(Figure 1)
Figure 1
Figure 1
14
Figure 2
Figure 2
Figure 1