8. Install the Towel Bar
Start a setscrew into each post. Do not thread fully into the post.
If included, place an escutcheon on both the left and right side wall
plates.
NOTE: The escutcheons are loose until the posts are in place and the
setscrews are tightened.
Align the towel bar assembly over the wall plates. Slide the
assembly onto the wall plates.
Tighten the setscrews with a hex wrench.
9. Install the Robe Hook
Start a setscrew into each post. Do not thread fully into the post.
If included, slide an escutcheon onto the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the robe hook assembly over the wall plate.
Tighten the setscrew with a hex wrench.
Kohler Co.
7
1020118-2-B