Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 Instructions for using the LED display
1.
Remove the parts from the packaging
and assemble the device according to the
instructions in this manual.
2.
Connect the power cable to the input terminal
in the base of the product. Then insert the
plug into the wall socket. The LED display will
light up and show '00'.
3.
Press the LED display once, to turn the
product on. The fan springs into life and will
thereafter default to the most recent speed
setting.
4.
Use the stainless steel exterior of the LED
display to switch between settings.
5.
When a display icon is flashing, you can set
Power
ventilation speed
down
Timer down
Horizontal oscillation
Natural wind
and adjust this setting by pressing the LED
display. When the desired position is reached,
press the LED display again to confirm the
selection.
6.
When setting the fan speed and timer
function, the LED display will continue to flash
until the desired setting is selected. After this,
press the LED display again to confirm the
selection.
7.
Once the function is set, the icon will stop
blinking and will remain visible in the display,
for as long as this function is set to on.
8.
Press the LED display for a few seconds to
switch off the appliance.
power
ventilation speed up
Fan
Timer up
Timer
Vertical oscillation
Swing
Night mode
Comfort
Quiet
9
Publicidad
