Proxxon WP/E Manual página 11

rect position on the shaft in the interior of the device.
This is noticeable when the lock button engages
completely at that point. The shaft is then blocked.
3. Remove the rubber backing disc 4 and the disc 3.
4. Replace the rubber backing disc 4.
5. Fit the screw 2 and disc 3.
6. Tighten the screw 2 firmly.
9 Disposal:
Please do not dispose of this machine in household
refuse! The device contains reusable materials which
can be recycled. If you have any questions about this,
please contact your local disposal company or other
appropriate local facilities.
EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
On our sole responsibility, we declare that this
product conforms to the following directives and
normative documents:
EU Machinery Directive
DIN EN 60745-1 / 01.2010
DIN EN 60745-2-3 / 02.2014
EU EMC Directive
DIN EN 55014-1 / 02.2010
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 09.2005
DIN EN 61000-3-3 / 06 2006
Date: 26/02/2014
Jörg Wagner (Dipl.-Ing.)
PROXXON S.A.
The person authorised to compile the technical
documents is identical to the signatory
WP/E Angle Polisher
28660
2006/42/EC
2004/108/EC
- 11 -