Network Setup - Wiseup DVR-0031-4 Guia Del Usuario

3.3. For Android, iPhone and iPad users, please scan the QR code to download the
"BVCAM" APP.
IV. Network Setup
4.1. LAN (P2P) Mode Setup
4.1.1. Power on the camera by pressing the Power Button for about 2 seconds. It will take
up 1 minute for the WIFI signal to appear. When the blue indicator light starts flashing and
the red indicator light remains solid, it means the camera's WIFI signal is ready.
4.1.2. Go to the WIFI or WLAN Setting page on your phone or mobile device, connect to
the camera's WIFI signal named "CM*****". Wait for the WIFI to be connected and your
phone status bar will appear WIFI symbol as below:
[Note]:
If the camera's WIFI signal cannot be found after a long time, please recharge the camera
or reset it (See VIII).
4.1.3. Run the "BVCAM" APP.
4.1.4. Add the camera to the "BVCAM" APP as below:
For Android: Tap +> Tap Add the new online Device> Search for the camera > Tap the
camera icon > Tap OK or √.