Network Setup - Wiseup T187 Guia Del Usuario

III. Get Camera Ready
3.1. Please make sure the camera is fully charged and the Micro SD card has been formatted
already and is securely fitted into the camera's SD card slot, or it will not work. We recommend
that you use a SDHC Class 10 Micro SD card.
3.2. If you need the camera to work 7/24 hours, connect it to an outlet AC power supply using
the USB cable and DC 5V power adapter included.
IV. Network Setup
4.1. Install Smarp Dcam APP on Smartphone or Tablet PC
Go to your Google Play, search for "SMARP DCAM" or scan the QR code below. Install it on your
phone or table PC.
4.2. P2P Network Setup
4.2.1. Slide the Power Switch to the ON Position and go to the WIFI or WLAN setting page on your
phone or mobile device, connect to the camera's WIFI signal named "SMARP-******". The WIFI
signal password is "12345". Wait for the WIFI to be connected.
[Note]:
If the camera's WIFI signal cannot be found after a long time, please recharge or restart the
camera.