Human Touch AcuTouch 9500 Manual De Uso Y Cuidado página 6

take a seat
www.humantouch.com
1. Deploy the foot and calf massager
Before deploying the foot and calf massager, be sure the
area in front of the chair is clear of any obstructions.
While sitting in the chair, use the remote control legs-up
button to deploy the foot and calf massager.
The foot and calf massager deploys outward and then
upward. You can use the foot and calf massager in
any position once it leaves the floor. For your safety, the
foot and calf massager deploys and retracts slowly. You
may notice a variance in speed at different deployment
positions - this is normal.
CAUTION: Do not sit or stand on foot and calf massager.
Permanent damage will occur. Maximum weight on foot
and calf massager is 88 Lbs.
Do not inhibit the backrest or footrest from power
reclining or inclining. Do not attempt to manually recline
or incline the backrest or footrest. Interfering with the
power recline will permanently damage the chair.
2. Insert your legs into the foot and calf massager
Place your feet all the way into the foot and calf massage
wells. The bottom of your feet and the back of your calves
should be touching the well walls.
Should you accidentally attempt to retract the footrest while
your legs are in the foot and calf massager, the Human Touch
massage chair automatically turns off to protect you from injury.
When changing direction (from Recline to Incline and
from Leg Up to Leg Down), there is a slight pause while
the chair gears shift. This is perfectly normal.
8
Using your Human Touch massage chair
Just take a seat, deploy the foot and calf
massager, adjust the backrest, and you're ready for
the massage of your choosing. Your Human Touch
massage chair expertly soothes tired muscles
from head to toe, using a wide variety of massage
techniques that you control.
3. Adjust the backrest
Before adjusting the backrest, be sure the area behind
the chair is clear of any obstructions.
Use the remote control recline and incline buttons to
adjust the backrest angle for maximum comfort.
4. Converting the foot and calf massager to a footrest
1. While sitting in the chair, pull up on the footrest release
handle (located on the right-hand side of the footrest to
release the footrest.)
2. Rotate the footrest away from the chair until it locks into
position with the smooth side facing up.
3. Release the footrest release handle.
For an easier exit, retract the footrest and restore the backrest to a full
upright position before getting out of the chair.
Make sure the area behind/underneath the footrest is clear of any obstructions before
retracting the footrest.
With the foot and calf massager on top, press and hold the legs-down button
to retract the footrest. Press the Restore button
full upright position.
9
is easy.
to return the backrest to a