Gardenline PERGOLA Manual Del Usuario página 5

C
AA
L
BB
C
STEP 3:
Insert Crossbeam (C) into Crossbeam (D). Insert two Screws M6x10mm
(AA) through Crossbeam (D) and into Crossbeam (C); tighten down to
hold parts together.
STEP 4:
Insert two Screws M6x15mm (BB) through Plate (L) and into bottoms of
Crossbeam (C) and Crossbeam (D); tighten down screws to hold parts
together.
Repeat these steps for the second set of Crossbeams (C & D).
8
support@tdcusainc.com
MODEL: 22096-18 PRODUCT CODE: 44964
Assembly Instructions
D
2X
D
AA BB
(2) M6X10 mm Screw (2) M6X15 mm Screw
AFTER SALES SUPPORT
1800 599 8898
USA
04/2018
USA
EE
STEP 5:
Bring two Canopy Supports (E) together so their open ends meet. Place
one Connector (H) on either side of where these parts meet. Insert
four Screws M6x35mm (CC) through Connectors (H) and into Canopy
Support (E), then tighten down using M6 Nut (EE).
Repeat these steps to assemble remaining Canopy Supports (E).
AFTER SALES SUPPORT
1800 599 8898
USA
MODEL: 22096-18 PRODUCT CODE: 44964
E
H
H
CC
E
CC
(4) M6X35 mm Screw
04/2018
USA
Assembly Instructions
E
5X
E
EE
(4) M6 Nut
9
support@tdcusainc.com