How To Use; Getting Started; Usin G Yo Ur Blen D Er - Black+Decker FusionBlade BL1800 Serie Manual De Uso Y Cuidado

HOW TO U SE
This product is for household use only.
G E T T ING STARTE D
• Remove all packing material, any stickers, and the plastic band around the
power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
BLE NDI NG JA R ASSE MB LY
1. Turn the blending jar upside down and place flat on counter
top or work surface.
2. Place the blending jar blade base in bottom opening of the jar
with blades down. (A)
3. Place jar base onto jar and rotate clockwise until it is tight. It is
important to tighten to avoid leaking while blending. (B)
4. Turn the assembled jar right side up.
5. Place lid with lid cap on blender jar. (C)
6. Uncoil power cord from storage area under the base.
7. Place jar assembly on base.
8. Blender is now ready for use.

USIN G YO UR BLEN D ER

Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place ingredients to be blended into jar. For best results, add ingredients in
the following order:
a. Liquids first: liquids help the blades move easily when you turn on your
blender.
b. Powders(such as protein mixes and cocoa powder): powders should go
after liquids and before solids so they don't fly up and stick to the lid.
c. Soft foods: such as bananas and cucumbers go next.
d. Hard foods: such as frozen fruits and raw veggies.
e. Ice cubes last: they help pull all other ingredients down towards the blades.
3. Place lid on jar; make sure lid cap is in place.
4. Plug power cord into outlet. Press ON/OFF button. LED should turn a solid
color to signify the blender is in standby mode. After 60 seconds the unit will
automatically power off if no buttons are pressed. The LED will blink slowly
when the blender is in use.
5
A
B