Akasa elite Instrucciones De Instalación página 10

5. Boot-up your system. The enclosure LED should light up and your external drive should be ready
to use. NOTE:
motherboard Hot-Swap support for eSATA port).
(Windows)
To see you Elite hard drive enclosure open "My Computer" (Windows 2000/XP) or "Computer"
(Windows Vista/7). Double click on the icon of the external hard drive ready to use.
(MAC)
The icon of the ready to use external drive will appear on the
6. To access and browse the external drive under Windows or Mac simply double-click on its icon.
NOTE: If the hard drive inside the enclosure is brand new it needs to be formatted before it
becomes accessible (for instructions see hard disk formatting chapter).
Disconnecting the Elite enclosure (eSATA mode)
WARNING!
Do not unplug the SATA or power cable when using the Elite eSATA.
DOING THIS MAY RESULT IN LOSS OF DATA!
1. Turn off the system
2. Unplug the enclosure
NOTE: in some cases switching off the system may not be required (depends on motherboard Hot-
Swap support for eSATA port).
9
in some cases switching off the system may not be required (depends on
eSATA Connection
desktop.