Hdd Installation - Akasa elite Instrucciones De Instalación

Hard Disk Installation
. Open the back of the enclosure by undoing the securing screws and sliding out the interface
board from the aluminium housing.
2. Line-up the connectors and gently insert the interface board onto the 2.5" SATA hard drive until
the connection is secure. Insert the assembled HDD and interface board into the housing in the
direction shown on the picture below.
3. Push the HDD fully inside until it is flush with the housing.
NOTE:
Ensure the interface board fits into the housing grove. If it does not fit correctly,
it is probably inserted upside down.

HDD Installation

4