Control Panel - Firman P03612 Manual Para El Propietario

Control Panel

2
1
NOTE: Total power drawn from all receptacles must not exceed the name plate rating.
Engine Start Switch – Used to start engine
1
from the starter motor(Electric start model
only). To start engine, press and hold the
switch in the "START"(ll) position, the
engine will crank and attempt to start. When
the engine starts, release the switch to the
"RUN"(l) position.
2
4-1 Data-Minder(Multi-Meter) – Push the
SELECT button to show the Voltage, Hertz and
running hours. If the low oil indicator is lit,
check the oil level.
A - Digital display
B - AC voltage indicator
C - Frequency indicator
Battery Switch – Power the electric starter.
3
4
5
6
120/240V, 30A Twist-Lock – (NEMA L14-
30R) May be used to supply power for the
operation of 120/240 Volt, 30Amp.
English
3
4
5
D - Hour indicator
E - Low oil indicator
F - Select button
Page 11
7
6
240V 120V
11
Voltage Selector Switch – To select
7
between 120 Volt or 240 Volt.
8 120V, 30A RV (NEMA TT-30R)
Maximum full load 30 Amp current may be
drawn from this 120 Volt receptacle.
120V, 20A Duplex – (NEMA 5-20R) 20 Amp
9
of current may be drawn from this 120 Volt
receptacle.
Outlet Cover - Protect the receptacles from
10
dust and debris.
11
Ground Terminal – Consult an electrician
12
for local grounding regulations.
8 9
11
12 10
Customer Service: 1-844-FIRMAN1