Install The Trolley - Merik 411M Manual Del Proprietário

ASSEMBLY STEP 2

Install the Trolley

1. Attach the trolley threaded shaft to the trolley with
the lock washer and nuts as shown.
2. As a temporary stop, insert a screwdriver into the
hole in the front end of the T-rail.
3. Slide the trolley assembly along the rail to the
screwdriver stop.
NOTE: If trolley hits against any nuts on the T-rail,
the bolts and nuts were attached from the wrong
side and must be repositioned. Review Assembly
Step 1.
Temporary Stop
Screwdriver
Inner Nut
5/16"
Lock Washer
5/16"
Outer Nut
5/16"
Trolley
9
HARDWARE SHOWN ACTUAL SIZE
Lock Washer
Nut
5/16"
5/16"-18
Trolley
Threaded
Shaft