Handling The Tool During Use - Greenlee GATOR ESC25HVX Manual De Operación

Set-Up (cont'd)
and other causes and to prevent tool damage.
1. Confirm work area safety (See, General Safety
Warnings on pg. 4). Operate in a clear, level, stable,
dry location. Do not use tool while standing in water
or in contact with other conductors.
2. Inspect the work to be done and determine the

Handling the Tool During Use

To avoid contact with energized parts and reduce the
risk of electrocution or arc flash, and to avoid cutting or
pinching injuries, hold the tool properly during use:
1. Touch the tool only on the insulated handle. (Fig. 1)
2. Do not touch any part of the tool past the Tri-Barrier
Insulation Collar. Do not grip the collar. Keep hands
1000V
Greenlee Tools, Inc.
Gator Insulated Battery-Powered Inline Cutters
®
Fig. 1
Not
insulated Insulated
Fig. 2
Tri-Barrier
Insulation
Collar
Insulated
Not
Insulated
correct tool for the application. Using an incorrect
tool for an application can cause injury, damage
the tool, or cause personal injury. (See, this tool's
specifications on pg. 7.)
3. Confirm that the tool and head have been inspected
as directed above.
away from cutting head. (Fig. 2)
3. Keep the tool at arm's length, away from your body.
(Fig. 3)
4. Do not touch the cable. (Fig. 4)
5. Do not cut multi-phase cable or multiple cables at
the same time.
No
Multi-phase
Cable
13
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
1 arm´s length
No Multiple Cables
Fig. 3
Fig. 4
Fig. 5