SOLVO VALLÉS FH Serie Manual De Utilización página 11

deviation from the reference.
6. Press the key, the balance returns to
normal weighing mode.
To test the percentage a weight in a container varies from a reference, please follow
the below steps:
1. Put a empty container on the weighing pan. Press the
2. Place the standard object into the container.
3. Press the
4. Remove the container with standard object. Put another same container on
the weighing pan, wait for the stable display, it reads "0.000" or "0.00"
5. Add the goal object in the container, wait for tyhe stable display, the value
displayed is the percentage the weight of the goal object varies from the
standard weight.
6. Press the
7. If necessary, the weight of the goal object could be printed out.
WEIGHING UNITS
1. Press the key
mode (normal weighing, counting or percentage mode)
ENABLING WEIGHING UNITS
The units function can be programmed to turn certain weighing units on or off. To
enable or disable certain units of measure, perform the following procedure.
1. Press the
2. Press the
3. Press the
Press the
then the display reads "g no", press the
4. Follow the steps above to enable or disable Oz, Ct or dwt as the unit of
measure.
key. Wait for the stable display, it reads "100.000" or "100.00"
key to return to normal weighing mode.
to select the desired unit weight (g, oz, dwt) or weighing
key while pressing
key repeatedly until it reads "unIT"
key, the display reads "g yes" which means g available for use.
key to confirm. To disable g as the unit, press the
key, the balance reads "PrInT"
key to confirm.
00.00%
key.
key,
11