Safety Information; Preparatory Before Using - SOLVO VALLÉS FH Serie Manual De Utilización

SAFETY INFORMATION

 To avoid unnecessary demage to the balance, please pay attention to the
following tips.
 Please do not use this balance in dangerous área.
 Only the trained technicians could operate this balance.
 Please turn off the power of the balance before connect it or disconnect it
with other facilities.
 If the environment requires a higher safety standard, please follow the
relevant installation instructions.
 Excessive electromagnetic interference will make the displayed value in this
balance change. Once the interference is dismissed, the balance could
operate in normal way.
 Please avoid any liquid on the surface of the balance. A piece of lightly
damp cloth is allowed to wipe the balance.
INSTALLATION
 Please make sure the local voltage is in line with the rated voltage on the
name board
 Please pay special attention when use RS-232 as the pins location might
be incompatible with our facilities. Please check the pins locations
before the connection and turn off the connection of different configuration.
 If the facility or the power cord has apparent damage, please turn off the
power, put it or them in a safe place and do not use it or them before they are
fixed.
 This balance could only be connected to our accessories or optional
fittings. We are not responsible for any modification the operator makes to
our balance, including using the facilities and cable which are not supplied by
us. However, we are always ready to offer the operation norms information.
 Please do not open the balance. If the guarantee lable is damaged, our
quality guarantee will automatically cease being effective.
 If the balance does not work well, please contact your local distributor or our
customer service center.

PREPARATORY BEFORE USING

STORAGE
This balance requires an environment which is free from excessive high or low
temperature, corrosive, vibration, air current and collision.
UNFOLDING THE PACKAGE
 Unfold the package and check if there is any outer damage of the balance.
 If there is outer damage, please refer to section routain maintenance and
troubleshooting
5