Introduction - English; Environmental Recommendations; Recommendations Regarding Use - Adeunis RF ARF33-PRO Instrucciones Para El Uso

INTRODUCTION - ENGLISH

All rights to this manual are the exclusive property of ADEUNIS RF. All rights reserved. Copying this manual
(without written permission from the owner) via printing, copying, recording or by any other means, translating
this manual (in full or partially) into any other language, including all programming languages, using any electric,
mechanical, magnetic or optical devices, manually or any by other methods, is prohibited.
ADEUNIS RF reserves the right to change the technical specifications or functions of its products, or to cease
manufacturing any of its products, or to interrupt technical support for one of its products without notice in writing
and urges its customers to make sure that the information they have is valid.
ADEUNIS RF configuration software and programs are available free of charge in a non-modifiable version.
ADEUNIS RF can make no guarantees, including guarantees concerning suitability and applicability for a certain
type of application. Under no circumstances can the manufacturer, or the distributor of an ADEUNIS RF program,
be held liable for any damage caused by the use of the aforesaid program. Program names, as well as all copy-
right relating to programs, are the exclusive property of ADEUNIS RF. Any transfer, granting of licences to a third
party, leasing, hire, transport, copying, editing, translation, modification into another programming language or
reverse engineering are prohibited without ADEUNIS RF's prior written authorisation and consent.
ADEUNIS RF
283, rue Louis Néel
38920 Crolles
France
Telephone +33 (0)4 76 92 07 77
Fax +33 (0)4 76 08 97 46

Environmental recommendations

All superfluous packaging materials have been eliminated. We have done everything possible so that packaging
can easily be separated into three types of material: cardboard (boxes), expanded polystyrene (packing material)
and polyethylene (bags, foam protection). Your device is composed of materials that can be recycled and reused
if it is dismantled by a specialist company. Please observe local regulations concerning the manner in which
waste packaging material, used batteries and your obsolete equipment are disposed of.

Recommendations regarding use

• Before using the system, check that the voltage shown in the user manual corresponds to your supply. If it
doesn't, please consult your supplier.
• Place the device on a flat, firm and stable surface.
• The device must be installed in a location that is sufficiently ventilated so that there is no risk of internal
heating and it must not be covered with objects such as newspapers, cloths, curtains, etc.
• The device's aerial must be free and at least 10 cm away from any conducting material.
• The device must never be exposed to heat sources such as heating equipment.
• Do not place the device close to objects with naked flames such as lit candles, blowtorches, etc.
• The device must not be exposed to aggressive chemical agents or solvents likely to damage the plastic or
corrode the metal parts.
• Install your device close to its DC power supply.
• Avoid electrical and RS232 extension cables over 3 metres in length.
208210A_UG_V1.6_ARFx3-PRO
GB
28